Today on guardianconstructions i will be discussing on how to calculate the number of blocks required for your 3 bedroom flat. This estimate would be based on the fact that a lot of my readers have been asking questions on how they can calculate the number of blocks required to build a 3 bedroom flat.

In order to calculate the number of blocks required, there is need to to have a plan at hand. The plan is what is required to work out the number of blocks for any building construction since all building dimensions are never the same.

Plans are important because they would show completely what the client's needs are.

**SO How many Blocks Do i need to build 3 bedroom flat?**

In order to answer this question, i am going to upload a plan since i'll be estimating based on the dimensions found on the building Plan

I am going to use the floor plan of a 2 bedroom Bungalow shown above as a case study, so i would like you to pay more than usual attention as i gradually unfold this for your understanding...

**Recommended**- Why is sand Added To Concrete?
- What is the Difference Between RC and RB Slabs?
- Materials for 3500 blocks
- Sand Filling Estimation
- How Much is a tiler paid In Nigeria
- Commercial Cleaning Companies in Dubai
- 5 Ways to make Money In Abuja
- Earn Big In Real Estate Business
- Mortar required to lay Blocks
- Calculate Materials for plastering

Before i begin the calculation of the number of blocks needed to complete a 3 bedroom apartment, i would like you to have these points at the back of your mind as i know you'll find it hard to understand this tutorial if you don't know them

**Point A**: There are 3 different types of block in Nigeria, these are

i. 5" Sancrete Block or 125mm block

ii. 6" Sandcrete Block or 150mm Block

iii. 9" Sandcrete Blocks or 225mm Block

iv. 6" Sandcrete Solid Blocks or 150mm block

Of all these, 5" and 6" are the most common because they are usually cheap and commonly used for small projects

**Point B**: The length of a sandcrete block is 18 inches or 450mm or 0.45m

**Point C**: Depending on the nature of thr site, the blocks laid from the foundation level to the DPC (The level at which you Damp Proove or apply Over-site concrete) is usually 4 coaches or levels unless its a swampy site where the you may get to 5-7 coaches before the DPC

Also, from DPC to the base of the window, you're required to have 4 coaches, from the base of the wondow up to the top of the window, you have another 5 coaches. Now from the top of the window to the base of the roof is another 3 coaches. We are going to neglect the lintel or concrete on top of the window

Having Known these points, lets now answer the question "How to Calculate the number of blocks needed for a 3 bedroom flat"

Remember we are going to be using the 6 inches block or 150mm sandcrete blocks all through the building.

Now the first thing to do is to add up all the external and internal dimensions from the architectural plan above.

we have successfully marked the plan into 4 different sides: A, B, C, D

So from the sides, we Calculate the Building girth

**How to Calculate the External girths of a building**

Add up all the external dimensions

A 9000mm +

B 7925mm +

C 11500mm +

D 11500mm = 39,925mm

==========================

The total =

**39925mm or 39.9m**
==========================

**How to Calculate the internal Girths Of A Building**

Having Added the externals, lets also add the internal dimensions (The dimensions other than those outside the building)

We are going to follow A Systematic pattern here. we will first of all get the dimensions of all the vertical dimensions other than A - D

Now the vertical internal dimensions are:

3125mm +

3125mm +

1450mm +

1400mm +

4075mm +

725mm +

2600mm +

2150mm

**= 18650mm or 18.65m**
===================

Now lets get the horizontal Dimensions as well and add up the totals

3600mm +

2000mm +

2500mm +

2400mm +

4150mm +

3600mm +

3600mm +

2000mm =

**23850mm or 23.85m**
=====================

Total Internal Girth =

**23850mm or 23.85m**
==============================

Remember total External Girth = 39.9m

Therefore, the total Girth (External + Internal) = 42500 + 39925 = 82425mm or 82.42m

=================================================

Now, lets estimate the number of Blocks that would be able to enable us get to the DPC Level (Here, we will not remove doors since the digging covers everywhere including doors and windows)...

Since the length of one block =450mm, we are going to divide the total Girth which is 82425mm by 450mm

82425/450 = 183 block/coach (This means for every coach, we would need 183 blocks).

**To get the total for all 4 coaches**, we multiply by 4

So 183 x 4 = 732 blocks (Would be required to reach the DPC Level if: the site is located on a flat terrain that is not swampy)

Now Lets Determine the total number of blocks needed for the entire 3-bedroom flat

To do this, we need to know the number of block for each segment of the building

From Foundation to DPC = 4 Coaches

From DPC to window level = 4 Coaches

from Bottom of window to top of window = 5 Coaches

from Lintel to the base of the roof or Gable = 3 coaches.

We have a total of 16 Coaches In all

So We Multiply 183 x 16 = 2928 - 732 (used to dpc level above) = 2196 Blocks

We will now Deduct for Voids

**What Are Voids In A Building?**

Voids are open spaces like doors and windows

They are not usually covered with blocks thus the name.

Now lets Subtract windows and doors, lines where burglary would be used instead of blocks from 2196 blocks

Now for every 1500mm window, we understand from experience that a total of 22 blocks would be needed to fill the space so we remove this 22 blocks for all 1500mm window

**How to Know the number of Blocks to remove for every 1500mm Window**

1500/230 = 6.5

also, 1500/450 = 3.3

(6.5 x 3.3) = 22 Blocks

**How many 1200 windows do we have in the building?**

Counting, we have exactly 8 windows with the 1500mm dimension

so the number of blocks to be subtracted for windows = 8 x 22 = 176 blocks.

Now we would also calculate to know the number of blocks to be deducted for doors

**What is the Dimension for doors in a building?**

The standard door for a bungalow is usually 900mm or 3 feet

**How many Blocks do i deduct for a 900mm door?**

You deduct a total of 18 blocks for every doo

**How do i calculate the number of blocks deductable from a door?**

Its simple

The height of a door is usually 2100mm

divide this by 225 (2100/225 = 9) + width of the door divided by 450 (900/450 = 2) now 9 x 2 = 18 blocks for every 900mm door...

We also have a 1200mm Door

Now For a 1200mm door, lets see how to work out the number of blocks for a 1200mm door.

Door Width = 1200

Door Height = 2100

2100/230 = 9

1200/450 = 2.66

**Now How many doors are there in a 3 bedroom flat?**

we have a total of 7 doors, so we say 18 blocks x 7 doors = 126blocks

Now sum the number of blocks deductible (22+176+24+126)

Now remove 348 Blocks from 2196

2196 - 348 = 1848 blocks

Therefore, a total of 1848 + 732 = 2580 Blocks would be required for the job

I hope you found this useful in your practice as a site engineer, Architect or an estimator.

Now i hope i have been able to answer the question "How to calculate the number of blocks required to build a 2 Bedroom flat" and i hope you will found this useful.